Press the power switch 2 times in a row, the LED flashes 2 times, and then it enters the 1-minute mode;

2. Press the power switch 3 times in a row, the LED flashes 3 times, and then it enters the 3-minute mode;

3. After the LED (blue light) turns off, the hydrogen is completed.

Hydrogen concentration changes

1-minute mode: 500ppb, reduced to 150ppb after one hour;

3-minute mode: 900ppb, reduced to 320ppb after one hour;

The maximum hydrogen content is 6 minutes (3-minute mode twice), about 1100ppb, which is saturated.

Indicator lights

Blue: electrolysis mode

Red: charging mode

Yellow: charging end

It takes about 3 hours to fully charge the battery. Under full charge, the 1-minute mode can be used 30 times and the 3-minute mode can be used 10 times.

How to clean the bottle

1. Rotate the cup holder counterclockwise and the bottle cap clockwise to remove the parts;

2. After cleaning, please assemble the water cup;

3. After assembly, you can fill the bottle with water. Please check whether it leaks!

How to clean the ceramic core

1. Hold the upper part of the ceramic valve core with one hand and rotate the cap counterclockwise with the other hand to remove the ceramic valve core;

2. Put the removed ceramic core into the basin, rinse and soak it with water for 10 minutes;

3. Insert the ceramic core into the socket, hold the upper part of the ceramic core, rotate the ceramic core counterclockwise, and fix it on the cup cover.