鹦鹉孵化的温度是37度左右,湿度在55%到70%之间。如果温度偏高的情况,就会造成鹦鹉的壳有柔软的情况,湿度太高就会让鹦鹉的壳有粘腻的感觉,同时还会跟空气里面的细菌以及真菌进行接触。
鹦鹉在孵蛋期间,主人不仅要控制好温度,湿度也很重要,以免机器蒸发了过多的水分。同时还需要注意鹦鹉外壳在破裂的过程中,是不是有液体粘连的情况,以免鹦鹉刚出生就由于窒息造成死亡。
如果空气湿度不够的时候,需要及时使用液压器,避免太干燥,导致鹦鹉无法正常孵化。
The temperature for incubating parrots is about 37 degrees, and the humidity is between 55% and 70%. If the temperature is too high, the parrot's shell will become soft, and if the humidity is too high, the parrot's shell will feel sticky, and it will also come into contact with bacteria and fungi in the air.
During the incubation period, the owner must not only control the temperature, but also the humidity, so as to prevent the machine from evaporating too much water. At the same time, it is also necessary to pay attention to whether there is liquid adhesion in the process of the parrot's shell breaking, so as to prevent the parrot from suffocating and dying as soon as it is born.
If the air humidity is not enough, it is necessary to use a hydraulic press in time to avoid being too dry, which will cause the parrot to be unable to hatch normally.
When incubating parrot eggs, the upper surface temperature of the eggs in the incubator should be set at 38.5 degrees Celsius. Turn the eggs every 2-3 hours. Be gentle when turning the eggs to prevent two eggs from hitting each other. Any eggs with a little crack will become dead eggs.