字体有毛刺是因为油墨的关系1:油墨略干(导致油墨粘稠度增加才会产生毛刺)
2:如果油墨稀释度适中的话,那就是油墨本生易产生静电,这是需要添加适量的防拉丝剂,直至不在产生毛刺为止。
如果胶头放墨不全的话,才会跟油墨干的慢有关系,这个跟印刷环境的温度有关系如果不能改变环境温度,那就改变油墨的挥发速度!
The characters have burrs because of the ink 1: The ink is slightly dry (causing the viscosity of the ink to increase and then produce burrs)
2: If the ink dilution is moderate, it means that the ink itself is prone to static electricity. In this case, it is necessary to add an appropriate amount of anti-drawing agent until no burrs are produced.
If the ink is not fully released from the pad, it will be related to the slow drying of the ink, which is related to the temperature of the printing environment. If the ambient temperature cannot be changed, then change the evaporation rate of the ink!
The burrs on the fonts are caused by the ink: 1. The ink is slightly dry (causing the ink viscosity to increase and cause burrs)
2. If the ink dilution is moderate, the ink itself is prone to static electricity. In this case, it is necessary to add an appropriate amount of anti-drawing agent until no burrs are generated.
If the ink is not fully released from the rubber head, it will be related to the slow drying of the ink, which is related to the temperature of the printing environment. If the ambient temperature cannot be changed, then change the evaporation rate of the ink!